Black Box / Flight Recorder
Embed This Widget
Add the script tag and a data attribute to embed this widget.
Embed via iframe for maximum compatibility.
<iframe src="https://airlinefyi.com/iframe/glossary/black-box/" width="420" height="400" frameborder="0" style="border:0;border-radius:10px;max-width:100%" loading="lazy"></iframe>
Paste this URL in WordPress, Medium, or any oEmbed-compatible platform.
https://airlinefyi.com/glossary/black-box/
Add a dynamic SVG badge to your README or docs.
[](https://airlinefyi.com/glossary/black-box/)
Use the native HTML custom element.
Definition
Crash-survivable recording devices capturing flight data and cockpit audio
A black box is the informal collective name for the two mandatory flight recorders carried on virtually all commercial aircraft: the Flight Data Recorder (FDR) and the Cockpit Voice Recorder (CVR). Despite the popular name, these devices are neither black nor boxes in the traditional sense — they are encased in bright international orange housings with reflective tape to aid post-crash location, and their internal electronics are encased in protective shells engineered to survive the most extreme aviation accidents. Together, FDR and CVR data form the primary evidence that accident investigators use to reconstruct the sequence of events leading to a crash.
What Is a Black Box?
The Flight Data Recorder captures time-stamped engineering parameters from the aircraft's systems throughout each flight. Modern FDRs, required to record at least 88 parameters by FAA and EASA regulations, typically capture several hundred data points including altitude, airspeed, heading, vertical acceleration, control surface positions, engine thrust levels, flap settings, landing gear position, autopilot engagement status, and dozens of warnings and system states. The data is stored on non-volatile memory chips and overwrites itself on a 25-hour loop. The Cockpit Voice Recorder captures audio from the flight deck — pilot radio transmissions, cockpit conversations, ambient sounds including engine noise, stall warnings, and control inputs — on a two-hour loop. A combined unit, the COMBI recorder, serves both functions in a single housing and is now common on newer aircraft.
How It Works in Practice
Both recorders must meet stringent survivability standards. They are designed to withstand 3,400 g of impact shock (roughly 50 times the force that would kill a human), 30 minutes in a fire at 1,100 degrees Celsius, immersion in saltwater for 30 days, and crushing pressures equivalent to a depth of 6,000 meters of seawater. Each recorder emits an ultrasonic locator beacon (at 37.5 kHz) when submerged, designed to operate for at least 90 days — a specification that proved critically important during the search for Air France Flight 447, which crashed into the South Atlantic in June 2009. Investigators recovered the FDR and CVR in May 2011, nearly two years later, from a depth of 3,900 meters. The recovered data showed that the crew had inadvertently stalled the aircraft by pulling back on the sidestick in response to erroneous airspeed readings from iced-over pitot tubes.
Why It Matters
Without flight recorder data, many accident investigations would remain inconclusive, leaving safety improvements unmade and litigation unresolved. The FDR data from the Boeing 737 MAX Lion Air Flight 610 crash in October 2018 immediately revealed the role of the MCAS (Maneuvering Characteristics Augmentation System) in commanding repeated nose-down trim inputs that the crew could not overcome. Combined with the CVR from the Ethiopian Airlines Flight 302 crash five months later, the data gave investigators the evidence needed to ground the entire 737 MAX fleet worldwide and identify the specific design changes required for return to service. Flight recorder requirements have been progressively strengthened: following the disappearance of Malaysia Airlines Flight MH370 in March 2014, ICAO began working on requirements for real-time flight data streaming so that recorder data would not be lost if the physical devices were unrecoverable.
Key Facts and Figures
- The first mandatory flight recorder requirement in the US took effect in 1958 for large turbine-powered aircraft.
- Modern FDRs must record a minimum of 88 parameters, though most record 300 to 1,700 on newer aircraft.
- Both recorders must survive a 1-hour soak at 260 degrees Celsius and a 10-minute exposure at 1,100 degrees Celsius.
- The CVR records on a 2-hour loop; the FDR records on a 25-hour loop.
- The underwater locator beacon must operate for at least 90 days after activation.
- ICAO's Annex 6 requires flight recorders on all commercial aircraft exceeding 5,700 kg maximum takeoff weight.
Related Concepts
NTSB, Flight Data Recorder, Cockpit Voice Recorder, Accident Investigation, MCAS
Frequently Asked Questions
What is Black Box / Flight Recorder (FDR/CVR)?
What does FDR/CVR stand for?
Why is Black Box / Flight Recorder (FDR/CVR) important in aviation?
Safety & Regulation
- IATA (IATA)
- ICAO (ICAO)
- Airspace Classification
- Bilateral Air Service Agreement (ASA)
- Open Skies Agreement
- FAA (FAA)
- EASA (EASA)
- Wake Turbulence
- IOSA (IOSA)
- Traffic Collision Avoidance System (TCAS)
- Freedoms of the Air
- Air Traffic Control (ATC)
- Cabotage
- EU261 (EU261)
- CAT III Landing
- Bird Strike
- DOT Regulation
- NOTAM (NOTAM)
- Safety Management System (SMS)
- Airworthiness Directive (AD)
- Type Certificate (TC)
- Single-Pilot Operations (SPO)
Explore on Sister Sites
-
Airport Glossary ↗
Aviation terms for airports, routes, and air traffic control
-
Aircraft Glossary ↗
150 aircraft and aviation technology terms